3. Open/Remove ballast wiring compartment cover. 4. Identify the line and neutral wires running from the breaker box to the ballast and confirm the power is off using a voltmeter. 5. Cut all wires connected to ballast, Dispose of removed ball-ast and fluorescent lamps in accordance with government regulations in your area. 6.. The wiring diagram for LED series T8 tubes consists of several key components, including the ballast bypass, the non-shunted sockets, and the power supply. The ballast bypass is an essential part of the wiring diagram, as it allows the LED tube to receive power directly from the power supply, bypassing the ballast.
3. Cut all connections and remove the ballast(s) and the starter(s). 4. On non shunted socket. Connect Line and Neutral ONLY to one end socket as indicated in the diagram. 5. The other end socket is used only as lamp holder, no electrical connection. 6. Replace the fixture making sure that there are no lose connections or wires. 7.. a. LED T8 lamps for double-sided connections: Wire non-shunted sockets, connect one wire to L (LIVE) and the other to N (NEUTRAL). Avoid opposite side power. Use appropriate wires. b. Install the Hybrid T8 LED tube: Insert the Type A+B Hybrid T8 LED tube into the socket and rotate it slightly until it locks in place.