This document includes instructions for assembly of the hub and rotor for ADB brake systems. It also includes torque specifications for mounting the caliper on the torque plate for Hendrickson wheel ends. Required torque values and sequences are also incl\ uded. Created Date: 3/10/2025 4:12:23 PM. removing the brake pads. Any damage must be repaired. Sections 2.2 & 4.6.1 Guide Pins G Binding With the pads removed, the caliper should move freely by hand. Re-torque the carrier to anchor plate bolts per the OE spec and procedure, if binding. See Figure 26 (slide) and Table 4 (torque). Sections 4.5.1 & 5.3 Replace worn guide pins as needed.
The ADB22X disc brakes mount to the axle's anchor plate (torque plate) using fasteners that are installed parallel to the axle, while the anchor-plate fasteners used for the Bendix® ADB22X-V ™ air disc brakes install at right angles to the axle. Available with or without a combination spring brake unit, these brakes may also include optional.. BENDIX® ADB 22X ™ AIR DISC BRAKE KITS A DVD is available that shows this installation procedure. Go to the Literature Center on www.bendix.com to order BW7355 (ADB 22X™ Guide Pins). Cap (12) Ring (7) Actuator Nuts (13) Caliper (14) Ring (7) Caliper Bolt (3) Caliper Bolt (11) Guide Pin (2) Guide Pin (9) Rationalized Caliper Kit Contents ADB.