Cadillac Escalade Service Suspension System

If you've lifted or lowered your truck that has "AutoRide" deleted, you'll need to do these things to disable "Service Suspension System": 1. Disconnect negative battery cable. 2. Wire in a resistor at each shock location (see YouTube video link below on how to do this). 3.. Step-by-Step Guide to Resetting the System. Resetting the service suspension system on our Cadillac Escalade requires following a few specific steps. First, we'll turn the ignition key to the "On" position without starting the engine. Next, we'll press the gas pedal three times within five seconds to activate the reset mode.

The Ride Control warning signals when the Escalade computer system detects something is wrong with the suspension. On the Cadillac Escalade, this warning can be reset two ways depending on whether the Ride Control warning is showing due to electrical problems or due to a mechanical problem. If the fault is in the.. suspension control module is located in the rear of long wheel base (Chevrolet Suburban, Chevrolet Avalanche, Cadillac Escalade ESV & EXT and GMC Yukon XL) Z55-Equipped GM SUVs above the spare tire. There is a clip holding the wire harness to the vehicle. Remove this clip so that the wiring harness can be easily accessed.