The position of the attachment lift lever (A) determines the cutting height. Put attachment lift lever in desired cutting height slot. The cutting height range is approximately 1 to 4" (25,4 to 101,6 mm). The heights are measured from the ground to the blade tip with the engine not running.. The below steps are appliacble to standard lawn mowers.The cutting height can be adjusted in multiple levels.Move the cutting height lever rearward to decrease the cutting height.Move the cutting height lever forward to increase the cutting height.⚠️CAUTION: Do not set the cutting height too low. The blades can hit the ground if the surface of the lawn is not level.
The cutting height of Husqvarna Automower® can be adjusted either electronically or manually depending on the model, with settings ranging from a minimum of 2 centimetres (0.8 inches) to a maximum of 6 centimetres (2.4 inches). Grass height recommendation per model. Adjusting a mower deck height on a Husqvarna Tractor to cut correctly. How to remove your deck: https://youtu.be/c5NaStUPiAE