Manual setup allows you to set the clock without the atomic signal. After manual setup, the clock will continue to search for the atomic signal. • Press and hold the "M.SET" button (C) for 3 seconds. The clock will be in manual time set mode. • Press the "M.SET" button to advance the time by 1 minute.. Resetting your Clock 1. Hold down WAVE/SET for about 2 seconds to enter settings manually. 2. The time zone and DST (Daylight Savings Time) flash. Press + to select your time zone. Press − to turn DST to On or Off. The default settings are PST and DST on. Press RESET when the clock is inaccurate, even if "WAVE OK" or "OK" appears.
Radio Controlled Atomic Clock #50308A1 THE BEST IN TIME" Instruction Manual Package Contents: [1 l Atomic Wall Clock [1 l Instruction Manual What you need: [1 l AA Battery Thank You for purchasing this CHANEY® product. Please read this manual in its entirety to fully enjoy the benefits and features of this product.. Atomic Wall Clock Operating Instructions The radio controlled mechanism in your clock tunes itself to the time signal broadcast by the official U.S. Atomic Clock in Fort Collins, Colorado, also known as WWVB. The clock's time setting will occur automatically soon after the battery is inserted. Please read these instructions carefully and