This tool can be used to generate command strings to control Tesira products. Fill in the appropriate information in the prompts below to get started. All commands must be terminated with a "line feed" character (ASCII hex value 0A).. Tesira control; tesira text protocol; TTP. Please also review the Troubleshooting TTP which gives information on configuring a PC to connect to a Tesira system for testing purposes.. the Tesira server will send the message "Welcome to the Tesira Text Protocol Server", preceded and followed by 0x0D and 0x0A. The control system is now free to send TTP commands.
Tesira Text Protocol TTP Overview Tesira can be controlled via the control dialogs in the Tesira software, via third-party controllers or via a computer based terminal application. Supported connection methods include serial RS-232 or Ethernet. If using Ethernet a Telnet or Secure Shell Console (SSH) session can be initiated.. Tesira Text Protocol supports different Attribute commands as listed below. These are case sensitive and the availability of the command would depend on the DSP object Attribute Code. The following table shows the Commands which only apply to Attribute Codes. An Attribute Code may not support all of them, but it will support at least one..